Question: What does F3 mean on my GE microwave?

The F3 means you have a shorting membrane keypad. If and when an oven exhibits this code or is coming on or doing anything by itself, this is very dangerous and can result in a fire.

How do you fix the F3 code on a GE microwave?

GE Microwave F3 Error Fix

  1. Step 1: Remove Top Grate. remove the two screws holding in place. …
  2. Step 2: Remove the Control Panel. Remove screw holding panel on. …
  3. Step 3: Clean the Control Board. I looked ovsd the board and there was some corrosion that was making contact on board. …
  4. Step 4: Put It Back Together.

How do you reset a GE microwave?

How to Reset a GE Microwave

  1. Press the “Off/Clear’ button to cancel anything on the display, and reset the microwave. …
  2. Press the “Off/Clear’ button for three seconds to turn the “Control Locked” child lock off.
  3. Reset the cooking program if “Off/Clear” was pressed accidentally. …
  4. Perform a hard reset. …
  5. Reset the time of day.
IT IS INTERESTING:  Are takeout boxes microwavable?

What does sensor error mean on a microwave?

An error message in your GE Sensor microwave does not indicate there is a major problem. An error message is simple to care for and remove from your microwave display. The error message is caused by opening the microwave door too early when you are using the sensor cooking function.

How do I get my microwave to stop beeping?

Check these things first:

  1. Look for a Sound button. Seriously. …
  2. Press and hold either 1 or 0. Sometimes manufacturers give these keys hidden, secondary functions.
  3. Press and hold the Stop or Cancel button. Like 1 or 0, this key might have a hidden function when held.

22 февр. 2018 г.

Is there a reset button on GE Spacemaker microwave?

Locate the “Clear/Off” button on the front of the microwave. Hold it down for 3 to 5 seconds until the “LOC” error on the display disappears, or the timer or cooking time on the display resets.

Does a microwave have a reset button?

Most microwave ovens do not include a reset button. … The most common way of reseting your microwave is called a hard reset. A hard reset happens when you physically unplug the microwaves’ cord from the wall outlet.

How do you do a hard reset on a microwave?

Press and hold the START/ENTER key again for approximately 4 seconds. The L indicator or lock icon should disappear from the display. If the controls are still not responding, attempt a reset on the microwave by unplugging the unit for 2-3 minutes. Plug the microwave back in and attempt the use the microwave again.

IT IS INTERESTING:  Which coffee machine is best for Latte?

How many years does a microwave last?

The average microwave oven lasts about seven years with normal use, and even less with heavy use and poor maintenance. A large family may find themselves replacing their appliance every four to five years as they become more reliant on its use to heat up snacks and leftovers, or to defrost meals.

How does sensor cooking work on microwave?

Microwave sensor cooking uses temperature and humidity sensors inside the microwave to determine when the food is ready. When a microwave heats food, it excites the water in the food, causing it to give off steam as it heats.

How do you change the humidity sensor on a GE microwave?

How to Replace the Humidity Sensor in a GE Microwave

  1. Turn off your microwave and unplug the power cable.
  2. Turn the microwave around and remove all screws on the rear panel of the unit. …
  3. Grip your screwdriver by its insulated handle and place the tip of the screwdriver on one of the capacitor terminals. …
  4. Locate the circular metal humidity sensor on the board.

26 сент. 2017 г.

Why does my microwave keypad not work?

1. Defective control panel. In most cases of microwave buttons not working, the common cause comes out to be defective control panel. … If some of the buttons are working fine while others are not then you may have to replace the touchpad and the control panel.

What does PF mean on the microwave?

There has been a power failure or the clock time has been turned off. When power is first supplied to the microwave oven, a colon ( : ) will blink in the display. Touch the “Cancel/Off” or “Cancel” key (depending upon model) to stop the blinking.

IT IS INTERESTING:  Are plastic coffee mugs microwave safe?
UchiCook