How do I unlock my microwave?
To Turn the Control Lock Feature On or Off:
- Make sure the microwave oven and timer are off.
- Press and hold the CANCEL keypad for 3 seconds.
- Two (2) tones will sound and “LOC” or a padlock icon will be displayed (indicating the control is LOCKED).
- Repeat to unlock. Again, two (2) tones will sound.
18 июн. 2020 г.
How do I reset my Kenmore microwave?
How do I reset it? According to your description, the control lock for the key panel is enabled. To disable this control lock, press and hold the START/ENTER button for 5 deliberate seconds until two tones sound. The lock icon will be cleared from the display and you should be able to use the microwave normally.
How do you remove the control panel from a Kenmore Elite microwave?
First you have to remove the 2 screws that hold the vent above the microwave door. The vent will fold toward you and then you slide to the left to get it out of the hinges. After the vent is removed, there is one single screw that hold the control panel with the keypad.
How do I get the child lock off my microwave?
When you first turn on your microwave oven and under normal operation the “CHILD LOCK” feature is off. If “LOCK” or “CHILD” appears on your display . . . Press the “Stop” button three (3) times and the “CHILD LOCK” will be turned off.
How do I know if child lock is on?
Check to make sure the child safety lock is set to the unlock position. An indentation above the child safety lock lever, switch, or twist lock on the side of the door will tell you which position is locked and which is unlocked. Set the switch to the unlock position.
What causes a microwave to suddenly stop working?
The most common cause for a microwave oven not working at all is a blown main fuse. … When this happens, the fuse is considered “blown” and the fuse will need to be replaced with a new one before the microwave will start working again. The main fuse is not the only fuse found in microwave ovens.
Does microwave have a reset button?
Most microwave ovens do not include a reset button. … The most common way of reseting your microwave is called a hard reset. A hard reset happens when you physically unplug the microwaves’ cord from the wall outlet.
Why did my Kenmore Microwave stop working?
Another reason why your Kenmore microwave might not be working is that the thermal fuse has cut off. This happens when your microwave overheats and then the thermal fuse blows. Thermal fuses can’t be reset if they’re blown, so you have to replace them. This is something that a licensed technician can fix quickly.
How do you fix a microwave door that won’t open?
If the pivot or lever portion is broken, then the door hooks cannot be lifted to release the door. Unplug the unit and remove the cover to access the door latch lever. You may also need to remove the control panel to gain better access. Remove the broken piece and insert the new part into the pivot openings.
How do I clean the inside of my microwave door?
How to clean the inside of a microwave
- Step 1: Soften heavy build-up (optional) Heat 1 cup of water in a microwave-safe container for 3 to 4 minutes. …
- Step 2: Clean your microwave with dish soap. Wipe the interior with a soft cloth dipped in water and a little dish soap. …
- Step 3: Rinse and dry.
Can I replace a microwave door?
You don’t have to get an all-new microwave if you’re prepared to do a little DIY handiwork. Replacing the microwave door requires some effort and precision, but it’s not actually a difficult or dangerous repair.
How do you fix a digital microwave?
What to Do if Your Microwave Display Stops Working
- Check the Power Supply. The first step for any appliance troubleshooting is to check the power cable and power supply. …
- Open the Panel and Secure Loose Wires. …
- Consider Replacing the Control Panel. …
- Call for Appliance Repairs. …
- Buy a New Microwave.
How do you get scratches out of a microwave keypad?
For deeper scratches and divots, use a paste of one part baking soda to one part warm water. Rub this on the same as you would the mix of dish soap and warm water. You can also buff out scratches by applying toothpaste onto the scratch and scrubbing it in with a soft sponge, then rinsing off.
How do I clean my microwave control panel?
Cleaning the control panel: Wipe with a soft, damp cloth and dry immediately. Do not spray any solution directly onto the controls.
Microwave Cleaning Recommendations
- Heat one cup of water on full power for three minutes. …
- After the three minutes, allow five additional minutes of stand time.
- Then, clean as usual.